| |
|
|
aaSANITARY CORRUGATED TUBULAR HEAT EXCHANGERS |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
loose for field installation. THERMALINETM makes available project management and other services to assure that your process system is supplied, installed and commissioned to your requirements. |
|
|
|
|
|
|
|
|
|
|
| |
Process systems and pilot plants available from THERMALINETM range from basic to multi-function systems that combine several heat exchange technologies. Each is engineered to process specifications and can be delivered pre-piped, prewired and pre-tested for lower installation, relocation and operation costs. Equipment can also be furnished
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
New 3A Sanitary Design Offers: |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
- Superior Particulate Identity
|
|
|
| |
Little or no Maintenance - Product to product heat regeneration reduces energy costs up to 80% |
|
|
|
|
|
| |
|
|
|
| |
- Sanitary Single O-Ring Design
|
Double-Tube (DT) — Two concentric tubes; product tube inside a media tube for series flow — excels in processing fluids of moderate viscosity with medium to large particulates, or as an efficient direct regenerator
Triple-tube (TT) — Three concentric tubes; media paths inside and outside product path for series flow with greater heat transfer area — ideal for series cooling of products which change viscosity, or as an efficient direct regenerator
Multi-Tube (MT) — Several product tubes within a media tube for parallel flow; large surface area in a small package for thin fluids |
|
|
|
|
|
| |
|
|
|
|
|
|
 |
|
Sanitary Tube
Corrugation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
Corrugation: uniform, regular deformation of the HE surface to
increase heat transfer efficiency, which results in less area
required for any application. Sanitary tube corrugation is characterized by more gradual
angles that impart a “twist” or turning motion. This configuration is preferable for semi-viscous materials such as gravies, concentrates or particulate-laden products. Operation is simplicity itself: product flow and heating/cooling media flow are separated in concentric lengths of sanitary tubing; no moving parts, easy to clean. Direct regeneration, where product replaces media, can yield more than 80% energy savings. This not only increases thermal efficiency but eliminates
Multi-Tube (MT) Heat Exchanger product channeling. Thermal efficiency is so improved, in fact, that for typical thin film applications heat transfer area can be cut nearly in half. Applications once considered only possible in scraped-surface HEs (e.g., cheese sauces, puddings, aseptic fruit, tomato) are now successfully processed in THERMALINETM corrugated tubular heat exchangers. |
|
| |
|
|
|
- New corrugated pattern of product tubes promotes greater turbulence at low velocities. This reduces the amount of surface area required over traditional smooth tubes. Higher turbulence and uniform flow reduces fouling and also benefits cleaning in place.
- Removable models allow for easy replacement and cleaning.
- Durable connections with sanitary design
- Quick disconnect connections, saves maintenance time
|
| |
|
|
|
- Enhanced cleaning efficiency
- Can be used for indirect and/or direct regeneration
- Designed to 3A, #12-07 specifications.
- Computer program sizing for optimum efficiency and performance.
- Single O-ring design, easy to replace , makes alignment and disassembly simple
|
|
| |
|
|
|
|
|
|
| |
|
An Innovative Tubular Heat Exchanger Design |
|
|
|
|
|
|
|
|
|
| |
|
|
| Now you don’t have to choose between a welded or removable tubular HE design to meet your processing needs. The new, improved Corrugated Tubular Double, Triple, and Multi-Tube models meet the specifications for all food applications requiring tubular heat exchangers with these enhanced benefits. |
|
|
|
|
|
| |
|
|
|
Double Tube (DT) Heat Exchanger
The Double Tube heat exchanger consists of an outer corrugated tube
1.5 to 6 inches in diameter (38 to 152mm) with a corrugated inner product tube
1 to 4 inches in diameter (25 to 102mm). Tubular heat exchangers available in type 316 s.s., type 304 s.s., and AL6-XN. |
|
|
|
|
|
|
|
| |
|
|
| |
Triple Tube (TT) Heat Exchanger
The Triple Tube HE consists of an outer corrugated tube 3 to 5 inches in diameter (76 to 127mm) with a corrugated middle tube for product 2 to 4 inches in diameter (51 to 102mm) and a corrugated inner tube 1 to 3 inches in diameter (25 to 76mm). Tubular heat exchangers available in type 316 s.s., type 304 s.s., and AL6-XN. |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| |
|
| |
Multi-Tube (MT) Heat Exchanger
The Multi-Tube consists of an outer corrugated tube 2 to 6 inches in diameter (63 to 152 mm) with 7 to 19 inner corrugated tubes from 0.5 to 1.0 inch in diameter (13 to 25 mm).
The demountable design, which has a floating tube sheet on one end with double O-ring seal and leak detector; a fitting with gasket and sanitary clamp is installed on the other head. Tubular heat exchangers available in type 316 s.s.,type 304 s.s., and AL6-XN. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Home
Contact
Us 
